Magic Brands logo
Magic Brands logo

All articles

How to Connect The Magic Remote to The Magic BoxUpdated 3 hours ago

The Magic Remote™ 2.0 is designed to give you full control of your Magic Box with advanced navigation, voice commands, and a built-in keyboard. This guide covers setup, pairing, and troubleshooting so you can get started quickly.


Remote Overview

Front Controls (page 2 diagram)

  • Power On/Off

  • Cursor Mode

  • Home

  • Menu / Back

  • Volume Up & Down

  • Voice Command

  • LED Indicator & Microphone

Back Keyboard

  • FN Key: Enables blue-labeled characters.

  • FN LED Indicator: Lights up when FN mode is active.

  • USB Charging Port


Cursor Mode & Sensitivity

  • Enable Cursor: Tap the Cursor Mode button. The cursor will follow your hand movements, like a computer mouse.

  • Disable Cursor: Tap the Cursor Mode button again.

Adjust Sensitivity (Levels 1–4, default = 2):

  • Increase: Hold OK + Volume Up for 3 seconds (LED flashes twice).

  • Decrease: Hold OK + Volume Down for 3 seconds (LED flashes twice).


Pairing the Remote with Magic Box 2.0

  1. Hold OK + Back together for a few seconds.

  2. The LED Indicator will flash while connecting.

  3. Once paired, the LED stops flashing.

Tip: If pairing fails, turn the remote off and back on, then retry.


Charging Your Remote

  • Connect the provided USB-A cable to a power adapter and the Micro USB end into the remote.

  • Charging Indicator: Red light = charging; light off = fully charged.


Auto Sleep & Wake

  • Remote enters sleep after 20 minutes of inactivity.

  • Wake by pressing any button.


LED Indicator Guide

ActionLED Status
Enter pairing modeBlue light flashes slowly
Pairing successBlue light flashes 3 times quickly
Cursor/Air mouse activeBlue light stays on
Button pressBlue light flashes once
ChargingRed light on
Fully chargedRed light off
Low powerBlue light flashes quickly for 3 seconds

Technical Specifications

  • Wireless Mode: GFSK (2.4 GHz)

  • Range: 32 ft

  • Battery: 300 mAh rechargeable lithium (3.7V)

  • Power Use: <9 mA (standby <25 uA)

  • Operating Temp: 68°F–149°F

  • Size/Weight: 6.22” × 2.16” × 0.65”; ~3 oz

  • Charging Port: Micro USB

Included in Box:

  • Magic Remote™ 2.0

  • Charging Cable

  • Quick Start Guide


Support & Contact

For additional help, tutorials, or troubleshooting:



Was this article helpful?
Yes
No